The Homey Pro smart home hub is an expensive investment. Purchasing the unit on Black Friday saved me $50 (plus I saved $4 on the ethernet adapter I bundled with it), but I still had to pay a whopping $372.36 for the thing. In my humble opinion, this is radically overpriced, even considering its wonderful capabilities, and I would have been much more comfortable if it were in the $250 range. At the very least, ethernet could have been included. And yet... I get it. This is the cost that's what you'll pay for a Home Assistant box, but that requires a lot of your time to get working, and I've never been ambitious enough to try and wrap my head around it. So paying Homey engineers to do the heavy lifting is a fair trade-off.

The thing that I just don't know is if my investment is going to work out long-term. Athom, the company that developed Homey, was bought out by LG. This could be a good thing in that more money will (theoretically) be available to continue developing the project. But just as Samsung has hopelessly screwed up SmartThings, there's a very real possibility that LG will fuck up Homey and I'll be forced to jump to Home Assistant. Which is probably what I should have done from the start, but I just don't have the time to invest in learning how to make it work with all my stuff.

But anyway...

Homey Pro (which I'll be calling "HP" from her on out) has an IR blaster which can (assumably) be used to control my television, so I put it directly under the TV (where it also has an ethernet hub available for a more reliable signal vs. WiFi).

Once you've got HP set up via the Homey app, you can visit the HP "App Store" to get free apps for controlling all your stuff. Many are created by the HP community... but a surprising number of them are official apps direct rom the manufacturers themselves.

One of these apps is for Aqara devices. It was my plan to integrate my Aqara stuff via the Aqara hub's Matter upgrade. But when I tried, HP said that my hub didn't have any devices attached? So I used the official Aqara app and paired all the sensors directly to HP. And since you can only pair the devices to one hub at a time, that means my Aqara hub is now useless and got tossed in my electronics box. To be honest, the pairing is not easy. The first sensor took two tries (the second took six?!?). Three more to go. I really hope that's the end of it.

Next up I decided to jump head-first into what I've most been dreading... upgrading my Eve Smart Home light switches to the new Matter Smart Home protocol so that they can be controlled via Homey Pro instead of only horrendously shitty HomeKit.

I started with a single light switch that I rarely use. It went fairly well, but took some time...

1. First you push the Matter upgrade to the light switch via the Eve app (takes about 8 minutes).
2. The Eve app then kindly adds the new Matter-enabled switch back into HomeKit as a Matter device.
3. Then you put the device into "Matter pairing mode" via the HomeKit Home app. Then you copy the code that you're given.
4. Then you input the light switch's code into HP and HP pairs with it via Matter.
5. Lastly you inform HP where the device is and set the icon/description you want for it.

If all goes well, you then have a Matter-enabled light switch which is accessible by Homey Pro, Apple HomeKit, and even other smart home ecosystems which can integrate Matter devices (like Google Assistant and Amazon Alexa). If all doesn't go well, then you'll end up having to delete the device from HomeKit, reset the Eve light switch, add it back to HomeKit, then do steps 3-5 again. Fortunately, this only happened once so far.

UPDATE 12/4/2024: Over the course of two evenings, all my Eve light switches, motion sensors, door & window sensors, and smart plugs had been updated to Matter and added. Surprisingly, out of dozens of devices, only two light switches ended up giving me problems. But that was easily solved by resetting and re-pairing.

And now the real fun begins.

The biggest benefit of Homey Pro is that it can control such a wild variety of smart devices. And I have a ton of them. Everything from my Roomba robot vacuum to my security system to my smoke detectors (to name a few). Figuring out how to get all that stuff added so I finally have a cohesive smart home that's actually smart and where everything can work together is going to be my obsession for the rest of the week, I'm sure.